The core Cinder process appears in more than one guide, although none identifies a specific game build.

What You Need Before Moving Lava

Prepare both the source and destination before disturbing the Lava chamber.

Requirements07
  • Snow or Ice to cool the Lava
  • A Cryoblaster as a practical way to apply Snow
  • A tool that can break Scoria
  • A Grabber or Vacuum to collect Cinder
  • Solid transport such as Belts or Launchers
  • A sealed destination chamber
  • A Flamethrower to restore Lava

No exact unlock costs, required Factory Level, or standard chamber size are confirmed.

The Lava Transport Setup

Module 01

Source Side

Prepare Snow or a Cryoblaster before opening the Lava area. Cool Lava into Scoria, then break it into collectible Cinder.

Module 02

Transport Line

Move solid Cinder with a Grabber, Vacuum, Conveyor Belts, Launchers, or Drones. Filter unrelated materials out.

Module 03

Destination Side

Seal the destination chamber before converting Cinder. Use direct Flamethrower flame for the documented setup.

How to Move Lava Step by Step

  1. 01

    Find the Lava and assess the area

    Check where it can flow before opening the chamber.

  2. 02

    Apply Snow or Ice

    Keep cooling any flowing or dripping Lava until it solidifies.

  3. 03

    Break the Scoria

    Use a weapon, Rocket, Shovel, or another suitable tool. Broken Scoria drops Cinder.

  4. 04

    Collect the Cinder

    Use a Grabber or Vacuum to pick it up.

  5. 05

    Move the Cinder to the destination

    Carry it directly or use Belts, Launchers, or other solid transport.

  6. 06

    Place Cinder in a sealed chamber

    Filter Snow and unrelated materials before they reach the conversion area.

  7. 07

    Ignite Cinder with the Flamethrower

    The Cinder should change back into liquid Lava.

  8. 08

    Check the final containment

    Confirm that Lava is present and not leaking into adjacent systems.

How the Cinder Method Works

Raw Lava falls and spreads, and it is excluded from the normal Pump, Pipe, and Liquid Vent system. Cooling changes the transport problem: Scoria breaks into Cinder, which can enter solid logistics.

You can move Cinder with several tools, but the underlying Lava-transport process remains the same.

How to Store Lava After Moving It

The simplest approach is to store Cinder and convert only what you need.

  • Keep the chamber sides fully sealed.
  • Filter Sand, Residue, Snow, and other unwanted material.
  • Leave room to feed Cinder in and remove material.
  • Keep visible Cinder as a reserve.

Separate Cinder and liquid-Lava storage may be easier as a factory grows, but no standard size or blueprint is confirmed.

Why Your Lava Setup Is Not Working

Problem 01

You Are Trying to Move Raw Lava

Do not use a Belt or the normal Pump-and-Pipe system. Convert Lava into Cinder first.

Problem 02

The Lava Has Not Fully Solidified

Flowing or dripping Lava may need more Snow before it becomes Scoria.

Problem 03

The Cinder Does Not Turn Back into Lava

Use direct Flamethrower flame. Passive heat is not used for this documented conversion.

Problem 04

The Chamber Leaks

Check every edge before igniting Cinder. One missing wall pixel can release Lava.

Problem 05

Snow or Ice Is Clogging the Line

Filter Snow out before it can mix with Water and form Ice in Belts or tanks.

Problem 06

The Chamber Is Overloaded

Feed Cinder in smaller amounts or provide more contained space.